Pete Zabriskie - Project Sonerai II-L "Christine" N127PZ

Pete's Sonerai IIL

March of 2006 a Sonerai project is found on Barnstormers.com:


For Sale: Sonerai S-IIL, $4000.00 Yakima Washington John Berthelote second owner. Fusalage on gear, cowl, VW 1700cc Revmaster engine zero-time, wing sub-kits, canopy, various extra parts.

Sonerai on Trailer

                                                 

Sonerai is a John Monnett design of the 1970's, initially made as a single seat 1600cc VW engine racer in Formula Vee class. Popularity prompted John to enlarge his successful plane to a 2 seater, albeit 2 rather small people. With the larger 1835cc VW or more substantial 2180cc VW it will perform with two passengers very well. Today builders can build VW's as large as 2276cc which will fly two people very adequately. Flown with a wooded prop only on the VW to prevent any crank or bearing failure, the cost of a Sonerai even today can come in under $15,000 dollars, and be maintained with largely off the shelf VW auto parts. 4130 steel tube fusalage with fabric covering, and 2024T aluminum wings, built from plans available from Steve Bennett at Great Plains Aircraft Supply Co. there are several sub-kits available. Sub-kits include pre-formed wing ribs and pre-bent spars, landing gear, fiberglass cowl, canopy, wingtips, and wheelpants. All of these came with my project along with a zero-time Revmaster 1700cc engine. With the welding complete and controls for rudder and elevator installed, the fuselage on it's gear with wheels and mechanical brakes, this was a heck of buy at Barnstormers.com.


I visited John and invited EAA Tech Counselor Virgil D. Thovson of Ellensburg, WA., phone-(509)962-4156, to come look at the Sonerai. I liked what I saw. Virgil liked what he saw, except for the posa carb. Mr Thovson inquired who the original builder was, it is Travis S Mitchell of 801 S Maple Ellensburg, Wa 98926, as listed on 1st certificate of aircraft registration. Mr Thovson knew of Mr Mitchell and commented that his work was of good quality. NOTE: both Mr Mitchell and Mr Berthelote were employed as A&P personel at Cubcrafters of Yakima, Wa.. With a handshake and the exchange of a certified check John Berthelote and I closed the deal. We cashed his check, and loaded up the Sonerai (now nicknamed Christine) on my newly acquired 16' flatbed trailer (another story) and Christine and "Christine" and I were off down the road to Las Vegas, Nevada via the Great Basin Desert.

   

The fuselage and trailer you see pictured here are what I need to park. I plan to tarp the the whole fuselage for outdoors parking over the Summer. With luck our home search will be successful before Winter arrives.

hand shake

   

   
The first year “Christine” was home in Las Vegas, Nevada at our mobile home park. I fluted my pre-formed ribs, and began work on the right spar.

ribs

       
The next 5 years we were in Indiana and I boldly went where no sane builder should go before or again. Without tech guidance or near enough practice I drove my spar solid rivets.

spar1

 

The next year was spent drilling most of them out. With tech guidance and verrrry carefully.

spar2    

spar3

The present finds us in New Mexico and with tech guidance again, thank you Will Fox, I have finally arrived at a successful method of setting solid spar rivets. Also thanks to Dave Roe for his 3x rivet gun. 

rivet gun

 

   
There have been lots of other developments, getting Viet-Vet Dave Pratt (field Huey repair) weld up a single-seat mod was a good day.As with all builders when anyone asks, “When are you gonna' finish”, the answer is, “It's 90% done, 90% to go”. With a little more help from my friends this year will get a little more accomplished. Thanks for your time, Pete Zabriskie

http://websites.expercraft.com/phzabriskie/   See this link for my complete builders site, and please sign the Log and leave any and all comments or suggestions.

 

 

Thomas and his Zenith CH750 STOL

Besides being the Chapter President, Thomas birthed his Zenith CH750 STOL (shortfield take off & landing) aircraft in 2014!

The plane has the latest features with a Jabiru 3300 6 cylinder engine and a Dynon Skyview EFIS.

 

Early in the build.

 IMG 5504

IMG 5533

IMG 5541

IMG 5556

IMG 5592

IMG 5621

Using the fluting pliers on a strip of angle to get the bend just right. My director of music always told me that the only way to tune a flute was with an axe.  I'm not sure that would work here... Oh wait that was a harp! Opps...

IMG 5645

IMG 5647

This is pre-Jabiru but it still sounds good!

IMG 5697

 

IMG 6597

IMG 6607

IMG 6661

IMG 6923

IMG 7014

IMG 7020

IMG 7023

IMG 7037

IMG 7090

IMG 9521

IMG 9522

What movie should I watch tonight?

IMG 9532

IMG 9556

IMG 9566

Zenith 750 Video Links   
 Sport Pilot Flies the Zenith STOL CH 750 Light Sport Utility Plane  Flying the STOL CH 750 light sport utility plane Flying on a hot day: STOL CH 750 flight with the Jabiru 3300 engine 
 Zenith STOL CH750 light sport utility kit airplane- Report by Dan Johnson  The New Zenith STOL CH 750: Adjustable Seats, Raised Cabin, and Quick Build Kit  Airspeeds - Flying the Zenith STOL CH 750 powered by the Jabiru 3300
 Flying the new STOL CH 750 with the Dynon SkyView  Winter flight in the Zenith STOL CH 750  

 

 

Roger Smith - Piper Tri-Pacer

Roger's totally restored Piper Tri-Pacer is one sweet bird!

TriPacer

IMG 4439

IMG 4440

 

   Tri-Pacer Video's and Links
 We Fly What May be the Best Kept Four-Place Secret in Vintage Aviation  AOPA - Tri-Pacer Plane & Pilot Magazine - PIPER PA-22 “TRI-PACER” 

 1957 Piper Tri-Pacer Flying around southern Idaho - video

  Glacier Takeoff from Talkeetna Mountains, Gopro equipped Piper Tripacer Ski Plane - video

 Spectacular River Canyon Run Wing Mount, Talkeetna, Alaska, Piper Tripacer

     

Skip Egdorf - Taylorcraft

Skips - Totally restore Taylorcraft!

Notice that Skip doens't worry alot about paved runways...

HappyCanyon

tcraft24

utah1

utah2

utah3

utah4

 

 

 

George and Harlan's RV-7A Project

It all started with a dream and some room in the garage...

Right Aileron

George Right Aileron

George Right Aileron2

Feb 2010 - The project moved to the Santa Fe Airport with the fuseledge well under way.

fuse1

fuse2