Chapter Tool Crib

EAA Chapter 691 Tool Crib List

Photos and descriptions of tools below.

 Tool(s)  Value  Deposit Cost for 1 month
 Coax Cable Cutter& Crimper    $191.20 $15.00
     Tyco Pro Crimper II with 22 - 10 ga die $116.95 --------  --------
     Hex Crimp Die $131.95 -------- --------
     O crimp Die  $109.50 --------  --------
     Coax Stripper $  24.00 -------- --------
       
Molex/AMP Pin Tools   $42.69 $5.00
     Molex Crimper $49.00 -------- --------
     Small Pin Extraction Tool $16.92 -------- --------
     Large Pin Extraction Tool $19.45 -------- --------
       
Wire Cutters/D shell Crimp tools     $5.00 $27.00
     4 way crimp tool (D Shell Connectors)  $36.00    
     100 Pair Wire Cutter   $18.00    
       
Battery/Alternator Lug Crimper  $88.00   $44.00  $5.00
       
Minature pin insertion/removal tool set   $9.00  $4.50  $2.00
       
Electronic Tach Check $20.00 $10.00 $5.00
       
Rivet Squeezer and Cleco Sets   $164.85 $15.00
     Rivet Squeezer $269.95    
     50 - 1/2" Clecos $23.90    
     25 - 3/32" Clecos $11.95    
     25 - 5/32" Clecos $11.95    
     25 - 3/16" Clecos $11.95    
       
Brake Rivet Tool Set $20.00 $10.00 $20.00
       

Aircraft Scales

Scales are currently owned by Will Fox and can be used with Will's assistance.

If you need a calibration certificate for a Certificated Aircraft, you will need to

pay for scale certification. Plan to buy 2 - 9V batteries for the scales.

$1,500.00  

$150.00* **

* plus cost of Scale  certification

**Cost for one time use

 

 

       
       

Please Read The Tool Crib Rules

Additional Tools are available for longer term use with no deposit and member choice of donation to the chapter. Those tools include but not limited to:

  • Air Hammer/Chisel with chisel sets
  • Scale Multiplier Ramp set (Use as weight multiplier for bathroom scales)
  • Gas Regulators
  • Cutting Torch
  • Misc Wiring and connectors (take all you need)

Pictures of some of the above tools

wire stripper

Wire strippers designed for use with PVC insulated aircraft wiring

wire crimp  dies

Crimper tool set with std and coax dies

tach check

Electronic Tach Checker

regulators

Regulator set

molex set

Molex / Amp Pin crimper with pin removal tools

mini pin tool

Miniature pin insertion / removal tool.  This is for installing and removing pins tipically from 9, 15 , or 25 pin
"D" shell connectors

lug crimper

Heavy lug crimper designed for crimping battery and alternator lugs from #10 wire to 3/0

coax tools

Coax Tool set.  Note:, you will also need the crimpers with the Coax dies

brake set

Brake Set tool

air hammer-chisel

Air Hammer / Chisel set with various chisel attachments

cutting torch

Acetylene Cutting Torch head

misc wiring

Misc Wiring. and connectors

scale multipliers

Scale multiplier ramps.  These ramps are used to weigh aircraft using bathroom scales and have 2:1, 3:1, and
4:1 ramp positions.  For instance, on the 3:1 position, if the scale indicates 150#, the actual weight on the ramp
pad would be 450#.